It is very easy to set up Lanmodo car tent with this stand in 3 minutes:

• Fix the stand on a proper ground site.
• Unscrew the bottom adjustable screw and outward tripod stand base till it be stable enough, then screw the adjustable screw.
• Install stand tray at the top of stand by screws (No need to disassemble once fix well).
• Put car tent base on stand tray, and clock the base together with stand tray by screwing up all 4 screws.
• Unscrew the middle screw on stand to adjust height and insert the metal rod into the stand hole to fix height, then tighten up screw.
• Open the car tent canopy.
• If needed, use 4 pull ropes and 4 tent pegs to steady the outdoor umbrella, like picture as below:

What You Will Get in This Package:

Stand X 1
Pull Ropes X 4
Tent Pegs X 4